The Calibration Log looks like this:
Reflectometer Mode
Note: The Reflectometer Mode is only available for use with the mouse/pen wands.
Reflectometer Mode measures the spot reflectance of the area at which the imager is “looking.”
1.To activate the Reflectometer, click on the Reflectometer icon ( 
) on the tool bar below the menu options. The Reflectometer window opens.
2.Place the scanning device on any surface to see the spot reflectance of that surface. The green status bars shows the reflectance signal strength. The field to the right of the status bar shows the percentage of reflectance.
3.Select OK to exit the Reflectometer mode.
Quick Check® 890 User’s Guide | 3 - 7 |