Napco Security Technologies GEM-DXRP2 manual User

PROGRAMMING (OPTIONAL)

5.Enter the new User Code using the number buttons. If an old code is displayed, simply program over it. To erase the digit at the cursor, press G, then 0.

Note: Pressing Aagain will dis-

play non-programmable "OPTion" and "ACCess" screens. Do not attempt to program these screens as the entries will not be saved.

6.Press Dto save the code in mem- ory. Repeat steps 3-6 for each user.

Note: Duplicate Codes are not allowed; therefore a duplicate Code entered in

the LCD Window will erase when D

To Program User Codes

1.Using Number buttons, enter User Number

2.Press A

3.Using number buttons, enter User Code of up to 6 digits.

4.Press Dto save.

5.Press Cto Exit Pro- gram Mode.

User

Note: Press G, 0to clear character at cursor.

is pressed.

Note: To void a code, blank out each digit by pressing G0, then

press the Save (D) button.

Programming User Codes

26