Napco Security Technologies GEM-DXRP2 manual Instant, Reset, On/Off

KEYPAD CONTROLS & INDICATORS

Window. Displays system status messages, zone descriptions, etc.

STATUS Light. Lights (green) to indicate that the system is ready for arming. If a zone is not secured the light will be off and the zone will display in the window. If a zone has been bypassed, the STATUS light will blink while armed.

ARMED Light. Lights (red) to indicate that the system is armed. If an alarm has occurred, the ARMED LED will be flashing.

BYPASS Button. (1) Deactivates				INSTANT	Button. (1)	Cancels
selected zones from the system.				entry delay on Exit/Entry Zones,
(2) Unbypasses a bypassed zone				causing an instant alarm upon
(GEM-P3200/9600 panels only).				violation.	(2) Scrolls	window
				display backward (PRIOR). (3)
RESET	Button.	(1)	Resets	Answers “NO” to questions in the
various system troubles, displays,				window display.
etc. (See text.)		(2)	Resets	AREA Button (*). Selects other
residential smoke detectors.
				areas and is used with
Numerical Keys (1-9, 0). Used to				emergency buttons.
enter codes, zone numbers, etc.				Emergency Buttons. Used with
ON/OFF	Button.	Entry key.		the G button to signal an
Causes the entered code or				emergency, as follows:
selected function to be executed.				Press the	7 and the G

FUNCTION Button. Selects available system functions as displayed in the window. The selected function is executed by pressing the Jto button.

INTERIOR Button. (1) Bypasses all Interior Zones simultaneously to allow free movement within the premises. (2) Scrolls the window display forward (NEXT). (3) Answers “YES” to questions in the window display.

buttons for Fire Emergency.

Press the 8 and the G buttons for Auxiliary Emergency.

Press the 9 and the G buttons for Police Emergency.

5