Napco Security Technologies GEM-DXRP2 manual Cant, ArmSil, CANT/ ArmRst

Page 7

SETTING THE ALARM ( ARMING) WHEN LEAVING

CAN'T/

A C O N ArmZnF

 

CAN'T/

A C O N

ArmSil

 

 

Priority Arming. If you attempt to arm with a faulted Priority Zone, a 3-second tone will sound at the keypad, and "CAN'T/ArmZnF" will display in the window, indicating that the trouble(s) must be corrected before the panel can be armed. A zone selected as Priority Zone with Bypass (check your Alarm Plan) may be bypassed if in trouble. If the problem cannot be corrected immediately, press C, then arm the panel. A 3

second beep will sound at the panel to indicate arming with a Priority Zone in trouble. Be sure to have the trouble repaired as soon as possible.

Silence Alarm. If you enter your code while the alarm is sounding the message "CAN'T/ArmSil" will be displayed. The system will silence the alarm and will be ready to be armed again.

CAN'T/ A C O N ArmSnd

Alarm Sounding. If you are attempting to arm with Easy Arm (Optional) and the alarm is sounding, "CAN'T ArmSnd" will be displayed. The alarm will not silence. Only a valid User Code will silence the alarm.

T R O U B L E A C O N

CAN'T/ ArmRst

System Trouble. If you enter your User Code with a system trouble present, the mes- sage "CAN'T ArmRst" will be displayed. To arm, press Cand the system trou-

bles should disappear.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents AC on Ready Operating Guide for yourImportant Test Your System Weekly IntroductionTest your sounding device Test your telephone line Table of Contents Keypad Controls & Indicators Instant ResetON/OFF Setting the Alarm Arming When Leaving ArmSil CantCANT/ ArmRst CANT/ARM TrblEXX-XX READY1Armed Protecting Yourself While on the PremisesBypassing Interior Zones INT1+2Armed Instant Protection Disarm Turning OFF the AL ARM Disarming When ReturningXxxsec Hour Zone 24-Hour Zones programmed? ‰YES ‰NO Day Zone Day Zones programmed? ‰YES ‰NOFire Zonexx Fire ProtectionTRBL/ E41-XX Important! Read Carefully Would You Like More Safety Information?Preparing a Fire Escape Plan Family RehearsalFloorplan FloorplanLimitations of Fire Alarm Warning System Keypad Functions R Z R n O n / C h i me Y e s / N o L a y/ Ar m 1 4/ / N o On Zone 1 has not been received Central Station Monitoring Communicator FeaturesZONE02 Advanced FeaturesBypass Page Introduction Programming OptionalProgramming User Codes User Programming Example Select the Program Mode as followsARMED1 Keypad MessagesWait ExitxxArmZnf CancelArmSnd Wrong AlarmDAY ZN FireCommfl SystblAcfail LobattClosing Window Optional. a GlossaryGlossary Glossary System Trouble Error Codes Following Statement is Required by the FCC Napco Limited Warranty
Top Page Image Contents