9494 Operator's Handbook
Problems and Solutions –––––––––––––––––––––––––––––––––––––
This section helps you correct some problems that may occur. If you cannot fix a problem, please contact Service.
Problem | Solution | |
|
| |
|
| |
Prints blank labels. | (Thermal transfer models only) Check ribbon | |
| and reload if necessary. | |
|
| |
Printed supply has | Make sure the supplies are loaded correctly. | |
voids or is too light. |
| |
Check the supplies for damage or defects. | ||
| ||
| Reload supplies or ribbon if necessary. | |
|
| |
| Check the roller for jammed labels. | |
|
| |
| Check the supply type. Download the correct | |
| supply type command. | |
|
| |
| Check the contrast adjustment. Download | |
| the correct contrast adjustment command. | |
|
| |
| Clean the printhead. See "Care and | |
| Maintenance." | |
|
| |
Printer does not start. | Make sure the power cord is connected to the | |
| printer and plugged into a live outlet. Call | |
| Service. | |
|
|