Monarch 9450 manual Operator’s Handbook

9450 Operator’s Handbook

Problem	Solution
Print has voids or is too light.	Make sure the supplies are loaded
	correctly.
	Check the supplies for damage or
	defects. Reload supplies if necessary.
	Check the peel roller for jammed
	supplies.
	Check the supply type (i.e., indexed
	or non-indexed). Have the System
	Administrator set the supply type.
	Turn the printer off and switch to a
	fully charged battery.
	Clean the printhead.
Printer does not feed.	Turn the printer off and switch to a
	charged battery.
	Reload the supplies.
	Verify that a label is not jammed in
	the label path.
	Make sure the printer is not in sleep
	mode. Press [On/Off].
	Make sure no foreign matter is in the
	supply spool.
	Make sure the supply turns freely in
	the supply well.
	Make sure the printhead is closed.

6-4