Monarch 9450 manual Canadian D.O.C. Warning

Page 2

Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Monarch reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Monarch has made every effort to provide complete and accurate information in this manual, Monarch shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual.

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CANADIAN D.O.C. WARNING

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada.

Trademarks

Monarch and RASCAL are registered trademarks of Monarch Marking Systems, Inc. 9450 and 9459 are trademarks of Monarch Marking Systems, Inc.

Paxar is a trademark of Paxar Corporation.

Image 2
Contents Monarch Rascal Printer Canadian D.O.C. Warning Preface Terms to Know ParametersSleep Mode Operator’s Handbook Table of Contents Operator’s Handbook Chapter Getting Started Using the Buttons FeedCharging the Battery On/OffSocket Small Round Connector Removing and Loading the Battery Getting StartedAbout Sleep Mode Loading the BatteryAttaching the Belt Operator’s Handbook Chapter Loading Supplies Loading for Peel Mode Loading Supplies On/Off Button Supply Guide Support Frame Holder Knob Supply Chute Support Frame Backing Paper Label Loading for Non-Peel Mode Supply Guide Knob Leading Edge Well Removing Supplies Setting Communications Parameters Printer CommunicationsPress Feed once. The LED indicator blinks once Connecting the Communications Cable Printer CommunicationsRemoving the Communications Cable Printing in On-demand Mode Chapter PrintingRemoving Backing Paper Printing in Continuous ModePausing the Printer Clearing a Print JobCare and Maintenance Clearing JamsJammed Label Supply Supply Chute Guide Inserting the Supply Guide Cleaning the Printhead VoidsCleaning the Platen Roller and Peel Blade Let the printer dry briefly. Then, reload your supplies Chapter Troubleshooting Printing a Test LabelLED Indicator LED Indicator StatusProblems and Solutions Problem SolutionOperator’s Handbook Problem Solution Operator’s Handbook Chapter Specifications Printer SpecificationsAccessories Supply SizesPin Signal Direction Communications Cable Pin DefinitionsOperator’s Handbook Index Page Using the buttons Weight of printer Width of printer Page Toll Free