Matsushita CF-18NHHZXBM Removing the Main PCB and Lith- ium Battery, Removing the PAD PCB and I/O

7.1.10.Removing the Main PCB and Lith- ium Battery

<M>		Lithium Battery
<M>	<L>
HDD Guid Plate
		Connector (CN17)
Connector (CN36) <N>		Connector (CN8)
		Connector (CN3)
<N>		Connector (CN9)
		Connector (CN14)
Connector		LAN Cable
(CN23)
Main PCB		<N>
Connector (CN35)		Connector (CN12)
Connector (CN30)		<N>
PCMCIA Unit		to Connector (CN17)
		to Connector (CN8)

1.Disconnect the Cable from Connector(CN3).

2.Remove the Lithium Battery.

3.Disconnect the seven Cables from seven Connectors (CN9, CN12, CN14, CN23, CN30, CN35, CN36).

4.Remove the Screw <L>.

5.Remove the two Screws <M>.

6.Disconnect the two Cables from two Connectors (CN8, CN17).

7.Remove the four Screws <N>.

8.Remove the Main PCB.

9.Remove the PCMCIA Unit.

Screw <L>:DRSB2+5FKL

Screws <M>:DXYN2+J12FNL

Screws <N>:DXYN2+J18FNL

7.1.11.Removing the PAD PCB and I/O

PCB

<O><O>			<Q> I/O PCB
Connector ￿	<O>	PAD PCB	<Q>
(CN801)

<P>

1.Disconnect the Cable from Connector (CN801).

2.Remove the three Screws <O>.

3.Remove the PAD PCB.

4.Remove the four Screws <P>.

5.Remove the two Screws <Q>.

6.Remove the I/O PCB.

Screws <O>:DFHE5025XA

Screws <P>:DFHE5058ZB

Screws <Q>:DRSB2+5FKL

7.1.12.Removing LED PCB and Switch

PCB

LED PCB LED Waterproof Sheet

Power ￿

Switch ￿

Knob

Operation Sheet Switch PCB

1.Remove the LED Waterproof Sheet.

2.Remove the LED PCB.

3.Remove the Switch PCB.

4.Remove the Power Switch.

7.1.13. Removing the CPU Heat Plate

<R>

<R>

CPU Heat Plate<R>

1.Remove the three Screws <R>.

2.Remove the CPU Heat Plate.

Screws <R>:DFHE5025XA

7-4