Marshall electronic V-R261-DLW operating instructions Pixel-to-Pixel Mode, Aspect Ratio Settings

Page 16

Pixel-to-Pixel Mode

Use this setting to enable Pixel-to-Pixel mode.

This mode bypasses the monitor’s internal scaling function and displays images in their native resolution and aspect ratio, with a one-to-one mapping of incoming image pixels to screen pixels:

For incoming formats smaller than the native resolution of the window (or selected aspect ratio), the image will be displayed in the center of the window using only the necessary LCD pixels. For example, 480i images will only occupy exactly 640x480 pixels in a particular channel window in DLW mode, or if the channel is selected full screen, it will occupy exactly 640x480 pixels in the center of the screen. The surrounding screen area will be black.

Aspect Ratio Settings

Use this menu option to switch between several aspect ratio settings.

As the V-R261-DLW monitor has a native resolution of 1920x1200 RGB pixels, incoming images are automatically scaled to fit the screen:

In 4:3 mode, images are scaled up or down to fill the maximum 4:3 portion of the screen (1600 x 1200). IMD text and time code are superimposed on the lower portion of the image. The audio presence indicator and on-screen tally are displayed at the bottom of the screen, outside the image.

In Scaled 4:3 mode, images are scaled to a smaller 4:3 portion of the screen, leaving space for IMD text, tally, and audio presence indicator to be displayed below or around the image. Time code is superimposed on the lower portion of the image.

In 16:9 mode, images are scaled to fill the maximum 16:9 portion at the top of the screen (1920 x 1080). In this mode, IMD text and on-screen tally are displayed below the image. Time code and the audio presence indicator are superimposed on the lower portion of the image.

In Full Screen (16:10) mode, images are scaled to fill the entire 16:10 screen (1920 x 1200). In this mode, all OSD features are superimposed on the image. Note that when using a 16:9 input image in this mode, the image will be vertically stretched by approximately 10%.

The diagrams on the following show how IMD text, timecode, and the audio monitor icon are simultaneously displayed on the screen in each aspect ratio setting. The white area represents the video image.

16

Image 16
Contents Operating Instructions Model No. V-R261-DLWThis page intentionally left blank Contents Features Multi mode, Vectorscope and Waveform Monitor modeInstallation and Initial Setup InstallationConnections, Power-On and Initial Setup UnpackingFront Panel Features Power ButtonRear Panel Features RS-422/485 Serial InterfaceCompatible Input Formats Following SDI standards are supported by the V-R261-DLWDLW Monitor Layouts Waveform Monitor Mode Full Screen Video Mode On-Screen Menu Marker Setup Submenu On-Screen MenuMarkers Marker Background Center MarkerMonochrome Mode Video Config SubmenuBlue-Only Mode Pixel-to-Pixel Mode Aspect Ratio SettingsAnalog Phase DVI-Analog or VGA input only DVI-A CSC Mode DVI-Analog input onlyDVI-D CSC Mode DVI-D input only Curtain ColorSystem Config Submenu Color Config SubmenuHdmi CSC Auto Hdmi input only, via the DVI-I interface Saving and Loading User Presets User-Definable Function ButtonsIMD State OSD Config SubmenuStatus Display OSD Tally LED TallyOSD Timeout Anc. TimecodeAudio Monitor CC Monitor Closed CaptioningIMD Config Submenu OverviewIMD ID # IMD Group #Tally Source TSLIMD Fixed Config Submenu IMD Tally ModeIMD Baud Rate IMD Name S/NService Closed Captioning SubmenuIMD Fixed Align IMD Fixed StringWave/Vector Submenu Waveform ModeColor Waveform Scale Ancillary Submenu DID/SDID Service Submenu Software Version DisplaySpecifications Panel RS-422/485 Serial Interface RJ12Dimensions Maintenance WarrantyScreen Cleaning Burn-In WarningThis page intentionally left blank Marshall Electronics, Inc