Marshall electronic V-R261-DLW Specifications, Panel RS-422/485 Serial Interface RJ12

Page 32

Specifications

PANEL

RS-422/485 SERIAL INTERFACE (RJ12)

 

Screen Size

25.54” Diagonal

 

 

 

Display Area (h x v)

528 mm x 375.6 mm

Protocols: Image Video, TSL v4.0, MEI

Aspect Ratio

16:10 Native (4:3/16:9 Modes)

 

 

 

Pixels

1920 x RGB x 1200

 

 

 

Color Depth

8-bit

 

Pin No.

Signal

 

1

Tx-

Viewing Angle (h x v)

178° x 178°

 

 

2

Ground

Brightness

400 cd/m2

 

 

3

Rx+ (Receive from host)

Contrast Ratio

1000:1

 

4

Rx- (Receive from host)

Pixel Pitch (h x v)

0.2865 x 0.2865 mm

 

5

N/C

 

6

Tx+

VIDEO INPUT/OUTPUT

HD-SDI Input / Output

Supports ITU-R BT.656, SMPTE 259M, 292M, 274M, 424M, 425M

DVI-I Video/VESA input

CONNECTORS

3G-SDI Video Input

2 x BNC Female (75 Ω)

3G-SDI Video Output (Active Loop-Through)

2 x BNC Female (75 Ω)

DVI-I Video/VESA input

1 x DVI-I Female connector

Power Input 4-Pin XLR

Tally Hardware Interface HD-15 Female

RS-422/485 Interface

2 x RJ12 (Modular 6P6C)

TALLY HARDWARE INTERFACE (HD-15)

Activation requires contact closure of pin to ground on the HD-

15 connector:

Pin No.

Signal

1

Channel 1 Green

2

Channel 1 Red

3

Channel 1 Yellow

4

Ground

5

Ground

6

N/C

7

N/C

8

N/C

9

N/C

10

N/C

11

N/C

12

N/C

13

N/C

14

N/C

15

N/C

ELECTRICAL

Power Consumption

115 W

Voltage Requirement

24 VDC

V-PS24-7.5 Power Supply:

Input

100V-240V, 2.5A, 50-60 Hz

Output

18-24VDC, 7.5A, 150W Max

MECHANICAL

Dimensions (w x h x d): 23.3” x 16.29” x 2.14”

Weight (with desktop stand):

~17.5 lbs.

Operating Temperature

32°F to 104°F (0°C to 40°C)

Storage Temperature

-4°F to120°F (-20°C to 50°C)

Compliance

Œ, FCC-Class A, ANSI-63.4

 

(Certificates on file)

RoHs

Do not dispose. Return to

 

Manufacturer or Authorized Recycle

 

Facility.

32

Image 32
Contents Operating Instructions Model No. V-R261-DLWThis page intentionally left blank Contents Features Multi mode, Vectorscope and Waveform Monitor modeInstallation and Initial Setup InstallationConnections, Power-On and Initial Setup UnpackingFront Panel Features Power ButtonRear Panel Features RS-422/485 Serial InterfaceCompatible Input Formats Following SDI standards are supported by the V-R261-DLWDLW Monitor Layouts Waveform Monitor Mode Full Screen Video Mode On-Screen Menu Marker Setup Submenu On-Screen MenuMarkers Marker Background Center MarkerBlue-Only Mode Video Config SubmenuMonochrome Mode Pixel-to-Pixel Mode Aspect Ratio SettingsAnalog Phase DVI-Analog or VGA input only DVI-A CSC Mode DVI-Analog input onlyDVI-D CSC Mode DVI-D input only Curtain ColorHdmi CSC Auto Hdmi input only, via the DVI-I interface Color Config SubmenuSystem Config Submenu Saving and Loading User Presets User-Definable Function ButtonsStatus Display OSD Config SubmenuIMD State OSD Tally LED TallyOSD Timeout Anc. TimecodeAudio Monitor CC Monitor Closed CaptioningIMD Config Submenu OverviewIMD ID # IMD Group #Tally Source TSLIMD Fixed Config Submenu IMD Tally ModeIMD Baud Rate IMD Name S/NService Closed Captioning SubmenuIMD Fixed Align IMD Fixed StringColor Waveform ModeWave/Vector Submenu Waveform Scale Ancillary Submenu DID/SDID Service Submenu Software Version DisplaySpecifications Panel RS-422/485 Serial Interface RJ12Dimensions Maintenance WarrantyScreen Cleaning Burn-In WarningThis page intentionally left blank Marshall Electronics, Inc