Marshall electronic V-R261-DLW operating instructions Color Config Submenu, System Config Submenu

Page 18

■HDMI CSC Auto (HDMI input only, via the DVI-I interface)

The HDMI CSC Auto setting is used to accommodate newer HDMI interfaces that send colorspace signaling in the HDMI data stream. If this setting is set to On, the monitor will automatically determine which colorspace setting to use. If this setting is set to Off, or your HDMI signal does not contain colorspace signaling, the DVI-D CSC Mode described above will determine the colorspace configuration.

Color Config Submenu

Use the Color Configuration submenu to adjust the Red, Green and Blue Offset and Gain values of the two SDI channels, the DVI-D input and DVI-A input.

Each column adjusts a particular input channel, from SDI1 and SDI2 to the DVI-I input. For the DVI-I input, you can adjust the Offset and Gain for either a DVI-D or DVI-A input.

The Reset option allows you to return to the default settings for each individual channel.

System Config Submenu

Use the System Configuration submenu to control various system parameters.

System Configuration Submenu

18

Image 18

Contents Operating Instructions Model No. V-R261-DLWThis page intentionally left blank Contents Features Multi mode, Vectorscope and Waveform Monitor modeConnections, Power-On and Initial Setup Installation and Initial SetupInstallation UnpackingFront Panel Features Power ButtonRear Panel Features RS-422/485 Serial InterfaceCompatible Input Formats Following SDI standards are supported by the V-R261-DLWDLW Monitor Layouts Waveform Monitor Mode Full Screen Video Mode On-Screen Menu Marker Setup Submenu On-Screen MenuMarkers Marker Background Center MarkerVideo Config Submenu Monochrome ModeBlue-Only Mode Pixel-to-Pixel Mode Aspect Ratio SettingsDVI-D CSC Mode DVI-D input only Analog Phase DVI-Analog or VGA input onlyDVI-A CSC Mode DVI-Analog input only Curtain ColorColor Config Submenu System Config SubmenuHdmi CSC Auto Hdmi input only, via the DVI-I interface Saving and Loading User Presets User-Definable Function ButtonsOSD Config Submenu IMD StateStatus Display OSD Tally LED TallyAudio Monitor OSD TimeoutAnc. Timecode CC Monitor Closed CaptioningIMD ID # IMD Config SubmenuOverview IMD Group #Tally Source TSLIMD Baud Rate IMD Fixed Config SubmenuIMD Tally Mode IMD Name S/NIMD Fixed Align ServiceClosed Captioning Submenu IMD Fixed StringWaveform Mode Wave/Vector SubmenuColor Waveform Scale Ancillary Submenu DID/SDID Service Submenu Software Version DisplaySpecifications Panel RS-422/485 Serial Interface RJ12Dimensions Screen Cleaning MaintenanceWarranty Burn-In WarningThis page intentionally left blank Marshall Electronics, Inc