Marshall electronic V-R261-DLW User-Definable Function Buttons, Saving and Loading User Presets

Page 19

■User-Definable Function Buttons

Use the Function 1, Function 2, Function 3 and Function 4 menu items to define each function button on the front panel of the monitor. The following options are available for each button:

•

Marker

Toggle between different Screen Markers

•

Center Marker

Display/hide the Center Marker

• Marker Backgrd

Change how markers are displayed on the screen

•

IMD State

Display/hide IMD text

•

Anc. Time Code

Display/hide time code

• OSD Tally

Rotate amongst types of OSD Tally

•

Audio Monitor

Display/hide audio presence indicator

•

CC Monitor

Display/hide the Closed Caption Presence indicator

• Waveform Mode

Change the data displayed on the Waveform monitor

• Overlay Position

Change the position of the WFM Overlay in DLW Overlay Mode

•

Limits

Toggle the Limits option of the Waveform Monitor On or Off

•

Aspect Ratio

Toggle between 4:3 and 16:9 aspect ratios

•

Pixel to Pixel

Enable/disable Pixel-to-Pixel mode

• Ctemp/Gamma

Rotate amongst color temperature settings

• Blue Only

Enable/disable Blue Only mode

• Monochrome

Enable/disable Monochrome mode

■Saving and Loading User Presets

Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. Each Preset saves all monitor settings except for IMD configuration.

•Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded by selecting MFG. (Factory defaults cannot be overwritten.)

•Use To perform a full system restore, which resets ALL adjustable fields on the monitor to their “fresh-from- factory” state, press the Power, F1 and F2 button simultaneously. Note: You will lose ALL user adjustable settings on your monitor.

•Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model No. V-R261-DLW Operating InstructionsThis page intentionally left blank Contents Multi mode, Vectorscope and Waveform Monitor mode FeaturesUnpacking Installation and Initial SetupInstallation Connections, Power-On and Initial SetupPower Button Front Panel FeaturesRS-422/485 Serial Interface Rear Panel FeaturesFollowing SDI standards are supported by the V-R261-DLW Compatible Input FormatsDLW Monitor Layouts Waveform Monitor Mode Full Screen Video Mode On-Screen Menu On-Screen Menu Marker Setup SubmenuMarkers Center Marker Marker BackgroundMonochrome Mode Video Config SubmenuBlue-Only Mode Aspect Ratio Settings Pixel-to-Pixel ModeCurtain Color Analog Phase DVI-Analog or VGA input onlyDVI-A CSC Mode DVI-Analog input only DVI-D CSC Mode DVI-D input onlySystem Config Submenu Color Config SubmenuHdmi CSC Auto Hdmi input only, via the DVI-I interface User-Definable Function Buttons Saving and Loading User PresetsIMD State OSD Config SubmenuStatus Display LED Tally OSD TallyCC Monitor Closed Captioning OSD TimeoutAnc. Timecode Audio MonitorIMD Group # IMD Config SubmenuOverview IMD ID #TSL Tally SourceIMD Name S/N IMD Fixed Config SubmenuIMD Tally Mode IMD Baud RateIMD Fixed String ServiceClosed Captioning Submenu IMD Fixed AlignWave/Vector Submenu Waveform ModeColor Waveform Scale Ancillary Submenu DID/SDID Software Version Display Service SubmenuPanel RS-422/485 Serial Interface RJ12 SpecificationsDimensions Burn-In Warning MaintenanceWarranty Screen CleaningThis page intentionally left blank Marshall Electronics, Inc
Top Page Image Contents