■OSD Tally
Use this setting to choose how tally is displayed on the screen. The available OSD Tally options depend on the Tally Source selected in the IMD Configuration submenu
When the Tally Source is set to Standard (contact closure), OSD Tally can be set to Off, RGY, RG, or GR:
• | Off | |
• | RGY | Red, yellow, or green tally signals are indicated at both the bottom left and bottom right corners of the |
|
| screen. Two or three colors are shown simultaneously by subdividing each tally indicator |
• | RG | Red tally is shown at the bottom left of the screen, and green is shown at the bottom right. |
• | GR | Green tally is shown at the bottom left of the screen, and red is shown at the bottom right. |
The following diagrams show RGY, RG, and GR OSD Tally modes:
|
|
|
(red) | IMD Text 00:00:00: | (red) |
RGY mode: single color activated
|
|
|
|
|
|
| (gree | IMD Text | 00:00:00: | (gree |
|
| (red) |
|
| (red) |
|
| n) |
|
| n) |
|
|
|
|
RGY mode: two colors activated
(red) | IMD Text | 00:00:00: | (red) |
(green) | (green) | ||
(yellow) | |||
(yellow) |
|
|
RGY mode: three colors activated
00:00:00:00
(red) | IMD Text | (red) |
RG Mode: both colors activated
00:00:00:00
(red) | IMD Text | (red) |
GR Mode: both colors activated
When the Tally Source is set to TSL/MEI 422, OSD Tally can be set to Off or IMD:
• | Off | |
• | IMD | Red, yellow, and green tally is displayed according the protocol commands. Green, red, and yellow colors |
are shown individually on either the bottom left or right of the screen.
■LED Tally
Use this to enable or disable the physical LED tally on the top of the monitor.
21