Minuteman UPS PRO-E user manual Rear Panel, 120V Models

English

REAR PANEL 1 10

2

120V Models
	4	3	9
5				8

6 7

1.The Information/Rating Label.

2.The Battery Backup and Surge output power receptacles are NEMA 5-15R type (IEC 320 C13 sockets for 230V models).

3.The USB Communications Interface Port is for UPS monitoring and control.

4.The RS232 Communications Interface Port is for UPS monitoring and control.

5.The Dipswitches are for setting the Inverter output voltage.

6.The input power cord has a NEMA 5-15P Plug (IEC 320 C14 socket for 230V models).

7.The input circuit breaker will trip in the event the load exceeds the UPS’s power rating.

8.The RJ11/RJ45 modular connectors are used for 10 Base-T Network/Fax/ Modem protection.

WARNING: The 230V models are NETWORK PROTECTION ONLY.

9.The Surge ONLY output power receptacles are NEMA 5-15R type (IEC 320 C13 sockets for 230V models).

NOTE: The Surge ONLY output power receptacles are only on the following

models: PRO500E, PRO700E, PRO500iE, PRO700iE.

10.The Site Wiring Fault (SWF) LED illuminates when the UPS detects an improperly wired AC wall outlet (120V models only).

	1
230V Models	2
	3		9
5	4			8
	6	7

6