Minuteman UPS ED6200T, ED6000T user manual Operation and Setup Instructions

Page 11

3.5.2A Qualified Electrical Contractor must perform the hardwiring when connecting the Input and Output wires to the terminal block on the ED6200T UPS. Apply 22.1lb-in of torque force when connecting to the terminal blocks. The Input and Output of the UPS MUST be Hardwired.

3.6.Operation and Setup Instructions

3.6.1Startup in the Normal Mode

3.6.1.1Switch the Utility power circuit breaker (at the service panel) to the On position.

3.6.1.2Switch the UPS’s Input circuit breaker (on the rear panel) to the On position.

3.6.1.3The UPS will startup. The Green LEDs & will illuminate to show the Utility and Bypass Inputs are normal. The LCD display will display drawing A then drawing B.

3.5.2.1 INPUT connections for the ED6200T Hardwired only:

1.Connect L1 from the utility to terminal L12.

2.Connect L2 from the utility to terminal N1.

3.Connect the earth ground from the utility to terminal G1.

CAUTION - To reduce the risk of fire, connect the UPS Utility input to a branch circuit with an over-current protection of 40 amperes in accordance with the National Electric Code, ANSI/NFPA 70. Use No. 8 AWG, 60°C copper wire and apply 22.1lb-in of torque force when connecting to the terminal blocks.

3.5.2.1.1OUTPUT connections for ED6200T Hardwired only:

1.Connect L1 from the load to terminal L22.

2.Connect L2 from the load to terminal N22.

3.Connect the earth ground from the load to terminal G2.

A Qualified Electrical Contractor must perform the hardwiring. The outputs must be connected to an over-current protection device (circuit breaker) of 30 amperes in accordance with the National Electric Code, ANSI/NFPA 70. Use No. 10 AWG, 60°C copper wire and apply 22.1lb-in of torque force when connecting to the terminal blocks.

A.

B.

3.6.1.4The UPS is in Bypass mode. The UPS will automatically perform a self- test. If there are no error codes displayed then the UPS has successfully passed the startup self-test and will start charging the batteries.

3.6.1.5Press and hold the On Switch (on the front panel) for approximately 3-seconds, then release. The audible alarm will sound 2-beeps then the LCD display will change from drawing B to drawing C.

C

18

19

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Parallel Redundant ED6000T & ED6200TTable of Contents FCC Notice Important Safety InstructionAn Important Notice Life Support PolicyProduct Introduction EPO Controls and Indicators Unpacking Installation and OperationQualified Service Personnel only Rear PanelStorage Instruction Installation PlacementInstallation of the Caster Covers AWG Wiring the Input and Output ConnectionsPage Operation and Setup Instructions Page It shows the UPS is providing power to the load It shows the Internal Temperature of the UPS System Page LED LCD RS232 Communication Port Power Monitoring SoftwareEPO Emergency Power Off Port Communication Port, EPO Port and Option CardsReplacing the Batteries Troubleshooting GuideService Personnel only Battery Replacement Procedure Page Regulatory Compliance SpecificationsPhysical Limited Product Warranty Obtaining ServiceDeclaration of Conformity

ED6200T, ED6000T specifications

The Minuteman UPS ED6000T and ED6200T are robust uninterruptible power supply (UPS) systems designed to offer reliable protection for sensitive electronic equipment. These units stand out in the market for their enhanced features, advanced technologies, and exceptional performance.

The core design of the ED6000T and ED6200T integrates a pure sine wave output, ensuring compatibility with all types of devices, including sensitive electronics and critical infrastructure. This feature minimizes electrical distortion, providing protection against damage from power fluctuations. They deliver up to 6000VA and 6200VA of power respectively, making them suitable for small to medium-sized data centers, telecommunications equipment, and critical servers.

One key characteristic of these models is their comprehensive LCD display that provides real-time monitoring of UPS status, battery charge level, load percentage, and other essential diagnostics. This user-friendly interface makes it convenient for users to assess performance at a glance and manage their power protection strategies effectively.

Both models employ advanced battery management technologies, including Smart Battery Management that extends battery life through optimized charging cycles. This is crucial for maintaining reliability, especially in environments where power outages can be frequent and disruptive. The UPS units also feature an automatic voltage regulation (AVR) system that corrects minor voltage fluctuations, maintaining consistent output without switching to battery mode.

Additionally, the ED6000T and ED6200T incorporate the Minuteman Green Power UPS™ technology, designed to minimize energy consumption and reduce heat output, thus contributing to lower operational costs and environmental sustainability. With an energy-efficient design, they are not only financially beneficial but also eco-friendly.

Connectivity options are another highlight, as both models feature multiple outlets, including surge-protected and battery backup outlets, ensuring plenty of connections for various devices. They are equipped with USB and serial communication ports that allow for seamless integration with monitoring and management software, thereby enhancing their functionality in networked environments.

In conclusion, the Minuteman UPS ED6000T and ED6200T are powerful solutions for businesses seeking reliable power protection. With their pure sine wave output, advanced battery management, user-friendly interfaces, and energy-efficient designs, they represent a solid investment for safeguarding critical electronics against power interruptions.
Top Page Image Contents