Minuteman UPS ED6000T, ED6200T user manual Controls and Indicators

Page 6

48

Er24

Bypass Input found when running on CVCF

mode (CVCF mode not supported)

 

 

49

Er26

PFC Over-current

 

 

 

50

Er27

The UPS must be operated in normal mode in

parallel system

 

 

51

Er28

Bypass Overload Time out and cut off output.

 

 

 

52

Er29

Charger overcharges battery (>300Vdc)

 

 

 

53

Er30

Inverter Balance error

 

 

 

54

Er31

The settings of both control board and driver

board are not matched together

 

 

55

Er32

Sync Signal error

 

 

 

56

Er33

Isolated transformer overheat

 

 

 

57

Er34

Balance function conflict

 

 

 

58

CEr1

Utility voltage out of range

 

 

 

59

CEr2

Bypass Voltage out of range

 

 

 

60

CEr3

Inverter Voltage out of range

 

 

 

61

CEr4

Load Percentage out of range

 

 

 

62

CEr5

Battery Voltage out of range

 

 

 

63

CEr6

UPS Output Voltage out of range

 

 

 

(** Er7, Er19, Er25 are reserved)

2.4.Controls and Indicators

2.4.1UPS Control panel

ALCD Display.

BN+1 (green) LED illuminates when the UPS is operating in the Parallel/Redundant mode.

CBypass (green) LED illuminates when the bypass input is normal. The LED extinguishes in the Battery mode.

DLine (green) LED illuminates when the utility input voltage is within the acceptable window. The LED extinguishes in the Battery mode.

EOn/Alarm Silencer switch is to turn the UPS On or silence the audible alarm in the Battery mode.

FUp arrow: Go to previous page or change the UPS setting.

GEnter key: To save the changes to the UPS setting.

HDown arrow: Go to next page.

IOFF switch is to turn the inverter off and transfers the UPS to the Bypass mode.

JSpecial functions key: Log in/out.

KECO (yellow) LED illuminates when the UPS is working in the ECO (economic, Line-interactive) mode.

LFault (red) LED illuminates when there is an abnormal condition or there is an internal fault.

8

9

Image 6
Contents ED6000T & ED6200T Parallel RedundantTable of Contents Life Support Policy Important Safety InstructionAn Important Notice FCC NoticeProduct Introduction EPO Controls and Indicators Rear Panel Installation and OperationQualified Service Personnel only UnpackingInstallation Placement Installation of the Caster CoversStorage Instruction Wiring the Input and Output Connections AWGPage Operation and Setup Instructions Page It shows the UPS is providing power to the load It shows the Internal Temperature of the UPS System Page LED LCD Communication Port, EPO Port and Option Cards Power Monitoring SoftwareEPO Emergency Power Off Port RS232 Communication PortTroubleshooting Guide Service Personnel onlyReplacing the Batteries Battery Replacement Procedure Page Specifications PhysicalRegulatory Compliance Obtaining Service Limited Product WarrantyDeclaration of Conformity

ED6200T, ED6000T specifications

The Minuteman UPS ED6000T and ED6200T are robust uninterruptible power supply (UPS) systems designed to offer reliable protection for sensitive electronic equipment. These units stand out in the market for their enhanced features, advanced technologies, and exceptional performance.

The core design of the ED6000T and ED6200T integrates a pure sine wave output, ensuring compatibility with all types of devices, including sensitive electronics and critical infrastructure. This feature minimizes electrical distortion, providing protection against damage from power fluctuations. They deliver up to 6000VA and 6200VA of power respectively, making them suitable for small to medium-sized data centers, telecommunications equipment, and critical servers.

One key characteristic of these models is their comprehensive LCD display that provides real-time monitoring of UPS status, battery charge level, load percentage, and other essential diagnostics. This user-friendly interface makes it convenient for users to assess performance at a glance and manage their power protection strategies effectively.

Both models employ advanced battery management technologies, including Smart Battery Management that extends battery life through optimized charging cycles. This is crucial for maintaining reliability, especially in environments where power outages can be frequent and disruptive. The UPS units also feature an automatic voltage regulation (AVR) system that corrects minor voltage fluctuations, maintaining consistent output without switching to battery mode.

Additionally, the ED6000T and ED6200T incorporate the Minuteman Green Power UPS™ technology, designed to minimize energy consumption and reduce heat output, thus contributing to lower operational costs and environmental sustainability. With an energy-efficient design, they are not only financially beneficial but also eco-friendly.

Connectivity options are another highlight, as both models feature multiple outlets, including surge-protected and battery backup outlets, ensuring plenty of connections for various devices. They are equipped with USB and serial communication ports that allow for seamless integration with monitoring and management software, thereby enhancing their functionality in networked environments.

In conclusion, the Minuteman UPS ED6000T and ED6200T are powerful solutions for businesses seeking reliable power protection. With their pure sine wave output, advanced battery management, user-friendly interfaces, and energy-efficient designs, they represent a solid investment for safeguarding critical electronics against power interruptions.