Configure the SNMP-NV6 card through Telnet

SNMP-NV6

6.Set both of the dipswitches of the SNMP-NV6 card to ON position (configuration mode). After the message appears on the screen, key in the account (default account is admin’) and password (default password is password). Then the SNMP-NV6 card’s Main Menu will appear on the screen. Refer to section 4.4 Configure the SNMP-NV6 card via Text Mode for more information.

4.3Configure the SNMP-NV6 card through Telnet

1.Connect the SNMP-NV6 card to the network.

2.Prepare a workstation (Microsoft Windows, Mac OS X or Linux) that is in the same LAN.

3.Set both of the dipswitches of the SNMP-NV6 card to the OFF position (normal mode).

4.From the Windows workstation open a DOS Prompt, type in the telnet HostName or the IP address. For other operating systems, please run the OS shell and type the same command.

5.After the message appears on the screen, enter the account (default account is admin) and the password (the default password is password) and then the SNMP

card’s Main Menu will appear on the screen. Please refer to 4.4 Configure the SNMP-NV6 card via Text Mode for more information.

Note: The SNMP-NV6 card will terminate the telnet connection if there is no activity within 1 minute.

4.4 Configure the SNMP-NV6 card via Text Mode

You can configure the SNMP-NV6 card via text mode by using a Telnet utility or through the COM port.

4.4.1 SNMP-NV6 card’s Main Menu

+========================+ Web Card Main Menu +========================+ Web Card Version 01.00.00 MAC Address 00-30-ab-25-e9-1e

[1].User Manager

[2].TCP/IP Setting

[3].Network Parameter

[4].Time Server

[5].Soft Restart

[6].Reset All To Default [z]. Exit Without Save

[0].Save And Exit

Please Enter Your Choice =>

Page 10