Auto Restart, UPS Buzzer, Low Battery | Minuteman UPS SNMP-NV6

SNMP-NV6

5.3.1.1 Auto Restart

Sends the command to the UPS to configure the auto restart function.

5.3.1.2 UPS Buzzer

Sends the command to the UPS to configure the buzzer function.

5.3.1.3 Low Battery

The set value is compared to the received value from the UPS. If the received battery level is lower than the assigned value then the card sends the Low Battery Warning.

5.3.1.4 UPS Shutdown Action

The set value is compared to the received value from the UPS. If the Power Fail or Low Battery event occurs then the card sends the assigned shutdown delay time to the UPS.

5.3.1.5 Smart Shutdown

Initiates a signal for the server to shutdown. After the user-defined Estimated OS Shutdown Delay, the output power is switched off. SNMP-NV6 Client or SNMP Shutdown Agent must be used on the server for it to be properly shutdown. The Estimated OS Shutdown Delay includes the assigned countdown delay in the shutdown software plus the duration of OS shutdown process. When the Shutdown Agent receives the Smart Shutdown signal, the low battery settings will be used to process the shutdown procedure.

5.3.1.6 Battery Replacement Date

After the battery replacement dates are assigned, the card then sends the command to store these dates in the UPS.

5.3.1.7 External Battery Pack

If you are using an External Battery Pack with this UPS, the UPS must be configured so that; the UPS will report the correct estimated runtime.

Page 19