Minuteman UPS SNMP-NV6 user manual Simple Network Time Server, Manual, Syslog, Batch Configuration

SNMP-NV6

5.4.6.1 Simple Network Time Server

Time Zone: Select the time zone where the SNMP-NV6 card is installed.

Primary/Secondary Time Server: The SNMP-NV6 card searches both of the Time Servers and follows the first reply server’s time. The card synchronizes with the Time Server every hour.

Enable Daylight Saving: This option is used to setup a daylight saving time. During the period of daylight saving time, the SNMP-NV6 card will add 1 hour automatically.

5.4.6.2 Manual

If it is not possible to connect to a Time Server then the only way to adjust the system time is manually configure the date and time.

Note: The system date and time will be reset to the assigned date/time if the SNMP-NV6 card is restarted.

5.4.7 Syslog

This menu allows the administrator to set the SNMP-NV6 card’s syslog. The syslog feature is used to store the event log to a remote syslog server. This feature does not affect the local event log.

5.4.8 Batch Configuration

If you are the administrator and you have finished configuring one of the SNMP-NV6 cards, you can copy the same configuration to the other SNMP cards by distributing the configuration files.

Note: You should only delete the lines which you don’t want to distribute and if the IP address is static then you must delete the line of IP address = xxx.xxx.xxx in the [System] section. The batch configuration can also work through the FTP.

Page 27