Minuteman UPS SNMP-NV6 Time Server, Soft Restart, Reset All To Default, Exit Without Save

SNMP-NV6

4.4.1.4 Time Server

There are two ways to set the SNMP-NV6 card’s current time and date. One is to set the system time manually, but this is not the best way. The ideal way is to set up a timeserver. The SNMP-NV6 card does support SNTP, which is supported by Windows XP.

To configure a Windows PC to act as a timeserver, please install the Simple TCP/IP Services from the Add/Remove Windows Components.

+========================+ Time Server +========================+

[1].Time Selection: SNTP

[2].Time Zone: +0 hr

[3].1st Time Server: POOL.NTP.ORG

[4].2nd Time Server:

[5].Manual Date: 01/01/2000 (MM/DD/YYYY)

[6].Manual Time: 00:00:00 (hh:mm:ss)

[0].Back To Previous Menu Please Enter Your Choice =>

Item	Function	Description	Default
[1].	Time Selection	Select SNTP or manually	SNTP
[2].	Time Zone	Select time zone	+0 hr
[3].	1st Time Server	The first time server for SNTP	POOL.NTP.ORG
[4].	2nd Time Server	The second time server for SNTP
[5].	Manual Date	Assign the date manually if the Time	01/01/2000
		Selection is selected to Manual
[6].	Manual Time	Assign the time manually if the Time	00:00:00
		Selection is selected to Manual

4.4.1.5 Soft Restart

Simply restart the SNMP-NV6 card. It does not affect the UPS.

4.4.1.6 Reset All To Default

Resets all of the settings back to the original default values.

4.4.1.7Exit Without Save

Exit and disregard any changes.

4.4.1.8Save And Exit

Saves the changes and exits.

Page 14