Minuteman UPS user manual Configure the SNMP-NV6 card through COM Port

SNMP-NV6

9.Select the SNMP-NV6 card in the Device List and then click on the Modify button. Enter the account and password. The default account and password are admin and password respectively.

10.Click on the Configuration button and then configure the essential network parameters.

4.2Configure the SNMP-NV6 card through COM Port

1.Prepare a workstation (Microsoft Windows 2000, 2003, 2008, XP, Vista, Win7 or later).

2.Use the RJ45 to DB9 serial cable (provided) to connect the SNMP-NV6 card’s COM port with the workstation’s COM port.

3.Set both of the dipswitches of the SNMP-NV6 card to OFF position (normal mode) to enable the network transmission.

4.From the workstation running Windows 2000, 2003, 2008, or XP, open HyperTerminal in the Accessories Program Group. From the workstation running Windows Vista or 7, download the Putty software from the Internet to execute the configuration.

5.Configure the COM port’s parameters: 2400 bps, 8 data bits, no parity, 1 stop bit and no flow control.

Page 9