Plustek SC8016U, SN8016U, Plustek manual Placing Business Cards

DO NOT load more than 100 sheets of paper (70 g/m2, 18 lb.) to the ADF.

Paper scanned from the ADF must be a minimum of 5.08 x 5.08 cm (2” x 2”, W x L).

Make sure there are no gaps between the document stack and the paper-width slider;

otherwise, the scanned images can be

skewed.

Attention  Although the documents should be loaded firmly in place ensuring optimum scanning accuracy, they should never be wedged in so tightly that the process of feeding them through the scanner is strained.

Do not load additional paper into the ADF while the unit is feeding and scanning.

PLACING BUSINESS CARDS

1.Vertically load the business cards, headfirst and face down, toward the center of the ADF and all the way into the ADF until touching the bottom.

For single-sided scans, load the business cards face down.

For double-sided scans, load the business cards in desired order.

2.Adjust the paper width slider to the business card width. The paper width slider should be gently touching both sides of the business cards.

Make sure the business cards you wish to

scan are vertically loaded into the ADF. Attention  Don’t load more than 20 business cards in

one batch.

26