Plustek SC8016U, SN8016U, Plustek manual Preparing Documents, Checking Document Conditions

PREPARING DOCUMENTS

Proper document preparation prior to the scan can prevent paper feed errors and damages to the scanner.

Checking Document Conditions

Loosening Documents

Checking Document Conditions

Make sure the size and ream weight of your documents are acceptable by the scanner. Refer to “Appendix A: Specifications” of this guide for more information.

To scan multiple documents in a batch from the ADF can increase your work efficiency and make large scanning tasks easier. The ADF of this scanner accepts a variety of paper and stationery you may use in your daily work or personal life, such as:

Normal paper whose size and ream weight meet the requirements stated in “Appendix A: Specifications” of this guide.

Notched paper

Coated paper (e.g., brochure)

To prevent paper feeding errors and damages to the ADF unit, strictly follow the instructions below:

Remove all small objects e.g., paper clips, pins, staples or any other fasteners attached, before loading the paper into the ADF.

Make sure the paper is completely flat with no creased or curled corners.

Avoid scanning documents with pencil lead

and newspaper clippings as they will make

Attention the ADF exposure glass and the inner ADF dirty. If you have to scan such paper, clean the scanner frequently (refer to “Chapter III. Care and Maintenance” of this guide for more information).

The paper for each batch scanned by ADF can be of the same or different weights. However, make sure the length of each scan batch is the same.

23