Plustek SC8016U, SN8016U, Plustek manual Power Save, Information Programs Your Scanner Model Name

POWER SAVE

To save power consumption, when the scanning process is finished, the scanner light source will turn itself off and the scanner will enter a lower-power mode without delay time.

	 The scanner will enter the standby mode
	(sleep mode) after it is idle for 10 minutes.
	Simply press any scanner button on the
	scanner panel and the scanner will return
	back to the normal status.
	 When you use the Ethernet cable to connect
	the scanner and your computer, please
	launch the Scanner Search Tool and click
	Search to wake up the scanner. Select the
	desired scanner to be used, and then click
	Connect Device button to make connection.
	(If your scanner does not have the Ethernet
	port, please skip this Step.)
	 From the Windows START menu, point to All
Information	Programs > Your Scanner Model Name,
	and then click Scanner Utility. (For Windows
	8 users: Point your mouse cursor to the
	upper or lower right corner of your screen to
	open the Charm bar. Click on the Search
	charm. The Apps screen will be shown. Click
	on an empty space in the Apps screen,
	move your cursor to the right edge of the
	screen to scroll right until you find Your
	scanner model name, and then click on
	Scanner Utility.) Refer to the online help of
	Scanner Utility to explore more about
	standby mode.

41