Scanning via TWAIN Interface
The TWAIN program is a very important piece of software that comes with your scanner. This program acts as an interface between the scanner hardware and the
The following describes how you may use our bundled application (NewSoft Presto! PageManager) and business card recognition software (NewSoft Presto! BizCard) to scan via TWAIN interface. When you get familiar with the scanning, you may alternatively use other TWAIN compatible scanning program or
Select the Scan Source:
If you have more than one scanner or other imaging devices installed on your computer, you need to set this scanner as the default scanning source before you acquire TWAIN program.
1.For Presto! PageManager: From the File menu, click Select Source.
For Presto! BizCard: From the File menu, click Select Scanner.
2.In the window that opens, choose this scanner and then click the OK button to set this scanner as the default scanning source.
Scan within NewSoft Presto! PageManager:
1.Click the Windows Start button to launch Presto! PageManager. (For Windows 8 users: Point your mouse cursor to the upper or lower right corner of your screen to open the Charm bar. Click on the Search charm. The Apps screen will be shown. Click on an empty space in the Apps screen, move your cursor to the right edge of the screen to scroll right until you find Presto! PageManager, and then click on Presto! PageManager.)
2.Within Presto! PageManager, click File > Acquire Image Data.
3.In the TWAIN window that opens, select ADF (Front Side) as the Scan Type if you want to scan
29