Plustek 820 manual Status Indicator, Changing Button Settings, Light Status

2.To change the scanning settings, click on the Smart Touch icon again, and then click [Properties] from the menu that pops up. Make desired adjustments within the Smart Touch Setting window that opens and then click [Close] button.

	Changes you make in the Smart Touch window are
	automatically saved every time you click Close to close the
Attention	Smart Touch window.

3.Insert the business card face up into the scanner. Align the paper to the arrow sign on the left of the scanner.

4.Press the BCR button on the scanner. The scanning starts immediately.

5.When the scan completes, the scanned image is sent to Cardiris program.

6.If you have more business cards to scan, repeat Step 2-5 until you have scanned all.

Changing Button Settings

Default button settings are optimized for most frequently scanning jobs, such as size, mode, resolution, ... You may, however, change the settings to tailor your every scan by accessing the “Smart Touch Setting” program. Please refer to the Smart Touch

on-line Help (accessible by clicking on the Smart Touch icon , located near the clock icon on the Windows system tray, and choosing Help) for more information about these functions.

Status Indicator

The green LED indicator (located beside BCR button) indicates the status of the scanner, as described below:

Light	Status
On	The scanner is connected with the computer, ready to scan images.
Flashing	The scanner is busy scanning.
Off	The scanner is off, either because of disconnection with the
	computer, or because the computer being turned off.
	16