20 | Installing the Archive Engine |
5.Secure the extension bracket to the rear side of the rack with two of the M5x10 screws and the provided washers. The extension bracket has threaded holes, so no nuts are needed.
6.Repeat steps for the other extension bracket.
Mounting the Archive Engine in the Rack
To mount the Archive Engine in the rack:
1.Confirm that the Archive Engine has the inner rails A and rail extensions B attached. Also, confirm that the outer rails C are installed on the rack.
C
A B
Archive Engine Rack Assembly
2.Line chassis rails A and B with the front of the rack rails C.
3.Slide the Archive Engine rails into the rack rails, keeping the pressure even on both sides (you may have to depress the locking tabs when inserting). When the server has been pushed completely into the rack, you should hear the locking tabs “click”.
Active Archive Appliance (A3) v6.5 | PowerFile Confidential | Racking and Installation Guide |