PowerFile A3 manual Installing the Outer Rails on the Rear-mounted Chassis

Installing the Media Library in a Back-to-Back Configuration 47

8.Repeat Step 1 through Step 7 for the left outer rail.

9.To install multiple chasses, repeat steps Step 1 through Step 8 for each front-facing chassis you plan to install in the rack. Make sure to leave enough room between the rails to accommodate the stacked 5 RU chasses.

Installing the Outer Rails on the Rear-mounted Chassis

The outer rails attach to the server rack and hold the server in place. The outer rails for the Media Library extend between 30 inches and 42 inches. No tools are required to attach the outer rails.

To install the outer rails:

1.On the rack's rear vertical post, identify the RMU location where you want to attach the right outer rail. The right outer rail should be installed at the same level as the right inner slide rail on the chassis.

Rear-mounted

Chassis

Inner Slide Rail

Outer Rail

Media Library Inner Slide Rail and Outer Rail on Rear-mount Configuration

Note: The rear-facing rails fit directly above the front-facing outer rails.

2.Adjust the rail to the proper distance so that it fits between the front and rear rack posts.

3.At the rear of the rack, position the rail so that one of the white mounting-bracket flanges rests against the inside of the rack post.

Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide