PowerFile A3 manual Outer Rail Front-mounted Chassis Inner Slide Rail

44 Installing the Media Library in a Back-to-Back Configuration

Installing the Outer Rails on the Front-mounted Chassis

The outer rails attach to the server rack and hold the server in place. The outer rails for the Media Library extend between 30 inches and 42 inches. No tools are required to attach the outer rails.

To attach the outer rails:

1.On the rack's rear vertical post, identify the RMU location where you want to attach the right outer rail. The right outer rail should be installed at the same level as the right inner slide rail on the chassis.

Outer Rail

Front-mounted

Chassis

Inner Slide Rail

Media Library Inner Slide Rail and Outer Rail on Front-mount Configuration

2.Adjust the rail to the proper distance so that it fits between the front and rear rack posts.

3.At the rear of the rack, position the rail so that one of the white mounting-bracket flanges rests against the inside of the rack post.

Refer to the following illustration for the location of the white mounting-bracket flanges on the outer rail. There is one mounting-bracket flange on each end of the outer rail.

Active Archive Appliance (A3) v6.5 PowerFile Confidential Racking and Installation Guide