64 |
|
| Setting Up the A3 System | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC Receptacles | Power Switch |
Cache Expansion Array Power Connectors
Powering On the Archive Engine (Generation 1)
Once the Media Libraries are powered on, and the LCDs display a message similar to “PowerFile Archive Library,” power on the Archive Engine (Generation 1) by pressing the power button located on the back of the chassis. It will take the Archive Engine
Power Button
Alarm Reset
Button
Archive Engine (Generation 1) Power Button and Alarm Button
There are two power supplies in the Archive Engine. It is important to connect both power supplies. It is recommended that each of the power supplies be attached to a separate UPS with built in surge protection and line conditioning.
In the event that one of the internal power supplies is accidentally disconnected, an alarm will sound. The alarm reset button will stop the alarm from sounding once you have reconnected the internal power supply. If an intermittent beeping continues, you may have to power down the system and power it up again in the correct sequence. You must unplug the system before servicing.
Active Archive Appliance (A3) v6.5 | PowerFile Confidential | Racking and Installation Guide |