POSIFLEX Business Machines PP3000 manual Unpacking Contents, Basic Mounting

INSTALLATION

UNPACKING CONTENTS

∙The printer

∙Test ribbon cartridge

∙Roll paper shaft

∙Spacer for 3” paper roll (2 ea.)

∙Spacer for 2.25” paper roll (2 ea.)

∙E -ring (2 ea.)

∙Test paper roll

∙Springy hook plate (mounted)

∙Rear hook

∙Screws to hold springy hook plate (mounted) and rear hook

∙Manual

∙Power adapter with power cord (option)

BASIC MOUNTING

For POSiFLEX PST POS System

TM

CHAP. 2

INSTA…

First install the springy hook plate and rear hook onto the metal bottom plate of the POS printer. Unscrew and re-install the springy hook plate in the way that the two springy hooks come out of the front edge of the metal bottom plate (they were pointing inward when shipped). Install the rear hook with its middle hook lock into the metal bottom plate first and screw the rear hook to the metal bottom plate (ref. Fig. 1). Connect the power cable and the printer cable (CCBLA-191 for serial interfaced printer or CCBLA-192 for parallel interfaced printer) in the way illustrated in the section of “CABLE CONNECTIONS”. Push open the battery cover of PST system and pass the cables through the opening beside the battery cover on the PST POS system and close the battery cover

2 - 1