TM
APP. A STAR …
CODES (HEX/CONTROL) : 1B 32 / <ESC> “2”
FUNCTION : Set n/72 inch line feed
DETAIL DESCRIPTION : This code sets the line feed at a defined value with the last <ESC> “A” previously described or the default value 12, and is effective since first <LF> received after this command.
CODES
FUNCTION : Set n/216 inch line feed simulation
DEFINITION RANGE : 1 ≤ n ≤ 255
DETAIL DESCRIPTION : Line feed is set at n/216 inch after this code is received, and is effective since first <LF> received after this command. However, since the actual mechanical precision is 1/144 inch for line spacing, the actual line feed is accomplished by simulation with integral multiplication of 1/144 inch step.
CODES (HEX/CONTROL) : 1B 34 / <ESC> “4”
FUNCTION : Select highlighted print mode
DETAIL DESCRIPTION : Prints with highlighted characters (white letter on dark background). If an underline, overline or inverted print command is input while the highlighted print mode is in effect, the highlighted mode will be canceled and the newly input command will be executed. If a highlighted print command is received while the underline, overline or inverted print mode is in effect, the previously set mode is canceled and the highlighted print mode will be set.
CODES (HEX/CONTROL) : 1B 35 / <ESC> “5”
FUNCTION : Cancel highlighted print mode
DETAIL DESCRIPTION : Cancel highlighted print mode.
A - 10