POSIFLEX Business Machines PP3000 manual Esc Sp

TM

CHAP. 7

CONTR…

†These control codes are applicable in serial interface only.

Control Codes		Hex Codes	Function
HT		<09>	Horizontal tab
LF		<0A>	Print and line feed
CR		<0D>	Print and carriage return
ESC SP	•	<1B> <20> “n”	Set right side character spacing
ESC !	‚	<1B> <21> “n”	Set printer mode (Font select)
ESC %		<1B> <25> “n”	Set/cancel	the	user-defined
			character set
		<1B> <26> “y” “c1”	Define user-defined character set
ESC &	ƒ	“c2” [<x> <d1> …	(max. 10 characters)
		<d(yxx)>]c2-c1+1
ESC *		<1B> <2A> “m” “nL”	Select bit image mode
		“nH” [<d>]k
ESC 2		<1B> <32>	Set 1/6 inch line space
ESC 3		<1B> <33> “n”	Set line spacing
ESC @		<1B> <40>	Initialize printer
ESC D		<1B> <44> [<n>]k	Set horizontal tab positions
		<00>
ESC J		<1B> <4A> “n”	Print and feed paper
ESC R	„	<1B> <52>	Select an international character
			set
ESC U		<1B> <55> “n”	Turn uni-directional printing
			mode on/off
ESC c 5		<1B> <63> <35> “n”	Enable/disable panel button
ESC d		<1B> <64> “n”	Print and feed n lines
ESC p		<1B> <70> “m” “t1”	Generate	pulse	(peripheral
		“t2”	device)
ESC t	…	<1B> <74>	Select character code table
ESC {		<1B> <7B>	Turn upside-down printing mode
			on/off
ESC u	†	<1B> <73>	Transmit peripheral device status
ESC v	†	<1B> <76>	Transmit paper sensor status
ESC =	†	<1B> <3D> “n”	Select peripheral device

7 - 6