POSIFLEX Business Machines PP3000 manual Codes HEX/CONTROL 13 / DC3, Codes HEX/CONTROL 14 / DC4

TM

CODES (HEX/CONTROL) : 13 / <DC3>

FUNCTION : Set deselect mode

DETAIL DESCRIPTION :

1.When using serial interface printer

This function differs depending on the setting of DIP switch 4.

a)When the DC1, DC3 invalid mode is set (DIP switches 4-1 to 4-4 are all set to ON), the printer ignores this code.

b)In the DC1, DC3 valid mode (with DIP switches 4-1 to 4-4 set to OFF), data following this code is ignored when the printer receives a<DC3> code.

The deselect mode is canceled by <DC1> code.

c)If the printer receives a <DC3> code during an addressable mode (with DIP switches 4-1 to 4-4 set to settings other than a) and b) above), the data following this code is ignored.

Deselect mode can be canceled by a <DC1> n code.

Note that addressable mode is valid only when the RS-422A interface option is installed.

2.When using parallel interface printer

Data following this code is ignored when the printer receives a <DC3> code. The deselect mode is canceled by <DC1> code.

CODES (HEX/CONTROL) : 14 / <DC4>

FUNCTION : Cancel expanded character mode

DETAIL DESCRIPTION : Cancel expanded character mode set by <SO> code (Data following this code is printed out in normal size characters).

CODES (HEX/CONTROL) : 18 / <CAN>

FUNCTION : Cancel print data in buffer

DETAIL DESCRIPTION :

1.When using serial interface printer Clears the data buffer and the line buffer

Clears the data buffer in the STX-ETX mode, and terminates the STX-ETX mode.

2.When using parallel interface printer Clears the data buffer and the line buffer

APP. A STAR …

A - 5