For Other System
TM
CHAP. 2
INSTA…
Install the printer on a stand or table which has a flat, even surface. Connect the power cord supplied for the power adapter (ref. Fig. 3) which varies according to destination region to a power outlet which is not used for any other electrical noise generating devices such as an electrical motor, etc.. Connect the printer cable as required.
Power adapter
Printer cable (serial or parallel)
Fig. 3 Installation to other system
Cable Connections
The PP3000 can either be powered by the PST system or by a separate power adapter. The serial interface and parallel interface apply different interface cables. The following drawings demonstrate two examples of the cable connections to the POS printer PP3000 series.
2 - 3