M A G M A
When installed correctly, you will see three “PCI to PCI Bridges” below your system’s PCIe Controller. Any 3rd Party PCI cards installed in the chassis will appear below one of the
If everything is OK, then the Magma Expansion System installation is complete. You can now proceed to Chapter 4 for help with the installation of 3rd Party PCI Cards.
If, however, the installation was unsuccessful, you may not see the PCI to PCI Bridge, or it will have a small yellow in front of it.
If any of these devices are not displayed as shown above, you should shut down your system (host computer first, then the expansion chassis) and reconnect the cables and reseat the PCI Host Card to ensure that you have a solid connection. Then restart the Magma expansion chassis, followed by the host computer. Next, try to verify the installation again, as shown above. If you are still having problems, review Chapter 5, Troubleshooting before contacting Magma Technical Support at (858)
8Chapter 3 Verify Installation