M A G M A
Next, slide the enclosure cover backwards, disengaging it from the guides at the front of the enclosure, by firmly grasping the rear cover lip over the card I/O area and pulling the cover backward about ½” and then lifting the cover off.
CAUTION
When replacing the enclosure cover, be sure that the front edge guides on the cover engage the inner lip of the enclosure.
InstallPCICardsinPCIExpansionChassis
CAUTION
When installing PCI cards or hard drives, please ensure that the input current rating specified on the AC input label is not exceeded.
PCI slots Power Supply
Fan assembly with slot holders for
Drive bay – used to mount up to eight (8) 3.5” internal hard drives using 1 or 2 optional Disk Drive Cages (PN: RDRIVECAGE)
5V load resistor – to be removed if optional hard drives are installed
12Chapter 4 Install 3rd Party PCI Cards