0$*0$
Powering Down:
It is recommended that you first shut down the host computer correctly and then power down the chassis to avoid ‘computer
Step Seven: Install Software Drivers
WARNING
You WILL be prompted to Shut Down and Reboot your system several times during software installation. Please be patient, each Shut Down and Reboot does serve a purpose and is required for correct installation. If you Shut Down and Reboot when requested, it may save you from having to make a call to MAGMA Technical Support.
Mac OS 9.x or Mac OS X
If you are running Mac OS, you may skip this step and continue to Step Eight. There are no MAGMA drivers required for Mac OS 9.x or Mac OS X. The Mac OS operating system should recognize the MAGMA expansion chassis on first boot with the chassis powered up and connected to the PowerBook. See Appendix A for Mac OS 9 Verification Instructions.
Windows 98SE & Windows ME
Although a MAGMA CardBus Driver is not required, MAGMA recommends that you install the MAGMA Software Utility before connecting the expansion chassis to your computer. See Appendix B, page 15 for complete MAGMA Software installation instructions.
If you did not realize that you should have loaded the MAGMA CardBus Driver already, it’s okay. Since a MAGMA CardBus Driver is not required, you may be prompted to locate and load drivers for PCI cards that you have installed in the chassis at this time. If you are prompted to reboot, please do so to ensure correct installation. After installation of other drivers is complete, you should load the MAGMA
Windows NT, Windows 2000 & Windows XP
CardBus Driver following the Windows 98SE/ME Instructions detailed in Appendix B of this manual. 6ORW6HULHV8VHUV0DQXDO
A MAGMA CardBus Driver is required for Windows NT, Windows 2000 and Windows XP. See Appendix B for complete driver installation instructions before continuing to Step Eight.