Magma CB1F manual Magma expansion chassis Adaptec 2906 Scsi Controller

0$*0$

You should also see a separate entry for each PCI card installed in the PCI Expansion System. For example, if you have an Adaptec 2906 SCSI card installed in the chassis, you should see a console window similar to the one shown below:

MAGMA expansion chassis Adaptec 2906 SCSI Controller

NOTE

Some PCI cards will produce multiple entries in the MagmaSlots console window.

￿￿If MagmaSlots￿6ORWdoes6HULHVnot8VHUdisplay￿V0DQXDOsome or all of the PCI cards installed in the expansion chassis, you should do the following before contacting MAGMA Technical Support:

1. Make sure that you apply power to the expansion chassis first, then power up the computer.

2. Make sure the MAGMA CardBus Interface is inserted with the Gold Strip facing up.

3. Make sure all cables are securely connected.