Troubleshooting
| Message | Corrective Action | |
|
|
|
|
|
|
| Toner has run out in the toner container. Replace the toner container using a new |
| Replace toner |
| |
| Clean printer |
| toner kit. The printer does not operate when this message is displayed. |
|
|
|
|
|
| The MP tray is out of paper. Load paper and press [GO]. (Note that feeding the | |
| Set paper |
| |
| Press GO |
| paper having a paper size which does not match the current paper size from the |
|
|
| MP tray can cause paper jam.) |
|
|
| |
|
|
|
|
|
| Toner is running low. Replace the toner container using a new toner kit. | |
| Toner low |
| |
|
|
|
|
|
|
|
|
|
| The top tray has become full. You must remove all printed pages from the top tray. | |
| Top tray |
| |
| paper full |
| When the printer detects that the top tray is empty again, the printer will continues |
|
|
| printing into the top tray. |
|
|
| |
|
|
|
|
|
| The toner container is not original. Use of original Olivetti toner kits is highly | |
| Unknown Toner |
| |
| Installed |
| recommended to prevent printer trouble and ensure the long life of the printer. |
|
|
| If a toner container which indicates Toner low or Replace toner Clean |
|
|
| |
|
|
| printer is installed to other printers of the same model, the message indicating |
|
|
| Unknown Toner Installed may be displayed. But, in this case, this toner |
|
|
| container can be used. |
|
|
|
|
|
| An USB flash memory error has occurred. Look at the error code given in place of | |
| USB memory err## |
| |
| Press GO |
| ## and refer to Storage Error Codes on page |
|
|
| press [GO]. |
|
|
| |
|
| The USB flash memory is accidentally removed from the printer. To ignore the USB | |
| USB mem. removed |
| |
| Press GO |
| memory error, press [GO]. The message display returns to Ready. |
|
|
|
|
|
| The storage area in the Microdrive for the virtual mailboxes is full. Print out | |
| Virtual mailbox |
| |
| full |
| accumulated jobs in the virtual mailboxes. |
|
|
|
|
|
| Printing job cannot be done in current resolution because there is not enough | |
| Warning |
| |
| image adapt |
| internal memory. Try adding more memory or changing resolution. |
|
|
|
|
|
| The printer’s internal memory is running low due to too many numbers of fonts and | |
| Warning |
| |
| low memory |
| macros downloaded. Try deleting unnecessary fonts and macros. |
|
|
|
|
† Messages separated by ‘( )/( )’ are displayed alternately.
††After this error has happened, page protect mode will be automatically turned on. To maintain optimum use of memory during printing, we recommend you manually turn off page protect mode.
OPERATION GUIDE |