Troubleshooting
Storage Error Codes
Microdrive Errors
| Code | Meaning |
|
|
|
| 01 | Microdrive format error. If this error recurs even if the power has been |
|
| turned off and then on, reformat the Microdrive. |
|
|
|
| 02 | The disk system is not installed. Recheck the requirements for using the |
|
| system and the devices. |
|
|
|
| 04 | There is no available Microdrive space. Delete unnecessary files, etc., |
|
| in order to free up space. |
|
|
|
| 05 | The specified file does not exist in the Microdrive. |
| 06 | There is no memory available to the Microdrive system. Increase the |
|
| available memory. |
|
|
|
| 10 | Formatting is not possible because host data is being spooled on the |
|
| Microdrive. Wait until the Microdrive is ready, and then format. |
|
|
|
| 85 | VMB: Alias error. The alias setting was lost, or the virtual tray |
|
| corresponding to the alias does not exist. Set the alias again. |
|
|
|
| 97 | The number of permanent code jobs that can be stored reached the limit |
|
| value, and no more can be saved. Either delete some unnecessary |
|
| jobs, etc., or increase the limit. |
|
|
|
| 98 | An unreadable page was found in a job (The job is damaged.). |
| 99 | A print job for the specified ID does not exist in the Microdrive. |
| CompactFlash Card/USB memory Errors | |
|
|
|
| Code | Meaning |
01The printer does not support the CompactFlash card inserted.
02The CompactFlash card is not installed.
04The CompactFlash card is full and cannot hold further data. Purge unnecessary files or use a new CompactFlash card.
05Specified file is not on the CompactFlash card/USB flash memory.
06Insufficient printer memory to support the CompactFlash card system. Expand printer memory.
OPERATION GUIDE |