Troubleshooting
Rear Unit
1 | If paper is not completely ejected |
| into the output tray, open the rear |
unit.
2 | Open the fuser cover and remove |
| the jammed paper by pulling it out. |
NOTE: If you cannot find a paper jam, try checking inside the rear of the printer.
| CAUTION: The fuser unit inside the printer is hot. Do not touch it with your |
| hands as it may result in burn injury. |
3 | Close the rear unit. The printer |
| warms up and resumes |
| printing.out. |
Paper Feeder
Paper is jammed at optional paper cassette 2 (to 4). Refer to the Installation Guide for the optional paper feeder and remove the jammed paper.
Envelope Feeder
Paper is jammed at the optional envelope feeder. Remove the jammed paper using the same procedure as for a jam at the MP Tray. Then, open and close the paper transfer unit. For details, refer to the User’s Manual for the envelope feeder.
Bulk Paper Feeder
Paper is jammed at the optional bulk paper feeder. Detach the bulk paper feeder from the printer by sliding with the rail away from the printer, holding the bulk paper feeder by both hands. If paper is partially fed out from the feeder's output slot, pull the paper out by hand.
OPERATION GUIDE |