Lanner electronic FW-7890 On-Chip Serial ATA, Serial ATA Port0 Mode Primary Master, Primary Slave

On-Chip (Primary/Secondary) PCI IDE : The Intel 82C440BX chipset contains a PCI IDE interface with support for two IDE channels. Select Enabled to activate the primary and/or secondary IDE interface. Select Disabled to deactivate this interface, if you install a primary and/or secondary add-in IDE interface.

On-Chip Serial ATA

This item allows you to configure your serial ATA devices if present.

Disabled	Disable SATA controller.
Auto	Auto arrange by BIOS.
Combined	PATA and SATA are combined. Max.of 2 IDE drives in each
Mode	channel.
Enhanced	Enabled both SATA and PATA. Max.of 6 IDE drives are
Mode	supported.
SATA First	SATA is operating in legacy mode.

Note. The items SATA mode, Serial ATA Port0 Mode, and Serial ATA Port1 Mode are configurable only when the ON-Chip Serial ATA item is not set to [Disabled].

Serial ATA Port0 Mode

Primary Master	Remap SATA Port 0 to IDE Pri. Master.
Primary Slave	Remap SATA Port 0 to IDE Pri. Slave.
Secondary Master	Remap SATA Port 0 to IDE Sec. Master.
Secondary Slave	Remap SATA Port 0 to IDE Sec. Slave.
P-SATA master	Remap SATA port 0 to P-SATA Master.
S-SATA master	Remap SATA port 0 to S-SATA Master.

Onboard Device : Scroll to this item and press <Enter> to view the following screen:

USB Controller: Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have USB peripherals

USB 2.0 Controller

Disable this function if you are not using onboard USB 2.0 feature.

Enabled	Enable USB 2.0 Controller.
Disabled	Disable USB 2.0 Controller.

USB Keyboard Support : Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB keyboard.