Krown Manufacturing Using Your Krown 200 with a Wireless Phone, Answering a Cellular Call

Page 28

X

USING YOUR KROWN 200 WITH A WIRELESS PHONE

If you order your Krown 200 with wireless option, use the supplied cable to connect your TDD direct to a select digital cell phone, or a cordless phone with 2.5mm headset jack. When purchasing a cell phone and service for your Krown 200, make sure you get a TDD compatible unit or look for the TDD-cell phone symbol.

OR

MAKING A CELLULAR CALL WITH YOUR KROWN 200

Always charge the TDD and your cell phone in full before use. Make sure you get a strong signal from your provider and your TDD is off. Setup your cell phone to work in TDD mode.

1.Connect the cable from the cell phone to the TDD

2.Turn on your TDD

3.Select TDD mode on your cell phone (refers to your cell phone manual for more detail).

4.Dial the number you are calling on the cell phone.

5.If the other party’s TDD picks up, the Krown 200 will display text and the conversation has been started.

ANSWERING A CELLULAR CALL

Make sure to turn the Ringer of your cell phone to vibrate mode. If your battery doesn’t support this mode, you may need to order a vibrating battery from your cell phone provider.

1.If the cell phone vibrates, you have an incoming call, connect your TDD using the cable that come with your TDD to the cell phone.

2.Answer the call on your cell phone (usually you press “talk” or “send” button on your cell phone. Refer to your instruction book for how to answer a call for your phone.)

3.Turn on your TDD and type your greeting message.

When you are ready to hang up, turn off the TDD and press the button to hang up the call on your cell phone.

NOTE: Connecting your TDD to a wireless phone is an option. Please call your Krown’s representative to have it installed. Cellular is not included.

26

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Model Krown Krown Manufacturing, Inc Introduction Krown Manufacturing Table of Contents Special Purpose Keys ControlShift Arrow KeysKeys Used with Control KEY Normal PrintWide Print DATE/TIMEEmergency DialSave / Hang UP Auto AnswerKrown To Setup Your Krown Lights and SwitchesGetting Started Getting StartedTTY Relay NUM Please Wait Check for Dial Tone DialingSending Voice ANS Electronic VoiceTDD Alert Battery Power InformationPress II Using Your Krown HOW to Make a TDD Call by Using Acoustic CupsSelect Option Placing a CallINT’L SPEED? Y/N INT’L on INT’L SPEED? Y/N INT’L OFFTelephone Conversations To Answer a TDD CallIII Direct Connect with the Krown ReturndialingDisconnect Y/N Disconnected Type Number or A-Z Keyboard DialingLine not Connected Type Number or A-Z Disconnect Y/N?Auto Direct Dialing RedialMEM 1-5 or Ddir Print DIR.? Y/NBecky KevinUsing the Krown 200 AUTO-ANSWER Feature Send VOICE? Y/NAnswer ASCII? Y/N Autoanswer OFFXXX Hello GA XXXTo Activate Remote Message Retrieval and Deletion IV Emergency Call MULTI-WIDE Printing Feature Wide PrintNormal Print Jumps Over the LazyFast Type Using the Optional Ascii Feature and Fast TypeAscii Code To Change Mode Settings Using the Optional Ascii Feature and Fast TypeTo Make Your Ascii Call To Receive AN Ascii Call AsciiTo Change Font Size Select Font Size and Adjust Brightness for Your DisplayTo Change the Brightness Viii HOW to USE VCO and HCO Call HCOIX Using the Clock Calendar PM? Y/NMaking a Cellular Call with Your Krown Using Your Krown 200 with a Wireless PhoneAnswering a Cellular Call Using Your Krown 200 with a Cordless Phone Using Your Krown 200 with Wireless PhoneTroubleshooting for TDD-WIRELESS Call XI Loading and Changing the Paper XII Take Your Krown 200 with YOU Xiii Technical Specifications XIV Important Information TroubleshootingTaking Care of Your TDD XV Miscellaneous Information Special TTY/TDD Operator Services 800Commonly Used TDD Abbreviations XVI FCC Required Information Page Orders
Top Page Image Contents