Krown Manufacturing manual Using Your Krown 200 with Wireless Phone

Page 29

USING YOUR KROWN 200 WITH WIRELESS PHONE (CONT.)

USING YOUR KROWN 200 WITH A CORDLESS PHONE

You can connect your TDD to a cordless phone with a 2.5mm headset jack, and enjoy the

freedom of making a call around the house. Charge the cordless phone and TDD at night to get them ready to use next day.

Making a cordless phone call with your TDD.

1.Connect the TDD to the cordless phone using the 2.5mm audible cable.

2.Turn on your TDD

3.Press ON or TALK button on your cordless phone and watch “Phone” light on your TDD to

make sure you get a dial tone.

4.Dial number on your cordless phone.

5.If the other TDD or Relay agent picks up your call, your TDD will display text message and the communication link has begun.

TROUBLESHOOTING FOR TDD-WIRELESS CALL

There are many new technology that has been used to establish the wireless communication link between you and the other TDD users, you will get some problems sometimes by many causes.

Garbled Text: It may be caused by lost, damaged or late signals sending through the air to the receiver. It happens with any wireless call, even non-TDD calls, and mainly caused by nature. Move your TDD and wireless phone to where you can receive a strong and contact signal. If you use a cordless phone refer to your owner’s manual to know how to switch channel or move closer to the base to strengthen the signal. Always check to make sure you have a good connection from the cable to the TDD and the wireless phone.

“Drop Call”: This happens sometimes when you are moving between 2 call towers or in valleys, hills, and tunnels. Try to redial when you have a stronger signal from your

cell phone.

Feedback: If you see your “Phone” light on your TDD on constantly, your TDD is getting feedback. You may reduce the volume of your cell phone or cordless phone down until the red light turns off and then increase it for better receiving.

27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Model Krown Krown Manufacturing, Inc Introduction Krown Manufacturing Table of Contents Control Special Purpose KeysShift Arrow KeysNormal Print Keys Used with Control KEYWide Print DATE/TIMEDial EmergencySave / Hang UP Auto AnswerKrown Lights and Switches To Setup Your KrownGetting Started Getting StartedPlease Wait Check for Dial Tone Dialing TTY Relay NUMSending Voice ANS Electronic VoicePress Battery Power InformationTDD Alert HOW to Make a TDD Call by Using Acoustic Cups II Using Your KrownSelect Option Placing a CallINT’L SPEED? Y/N INT’L OFF INT’L SPEED? Y/N INT’L onTelephone Conversations To Answer a TDD CallReturndialing III Direct Connect with the KrownDisconnect Y/N Disconnected Type Number or A-Z Keyboard DialingDisconnect Y/N? Line not Connected Type Number or A-ZAuto Direct Dialing RedialPrint DIR.? Y/N MEM 1-5 or DdirBecky KevinSend VOICE? Y/N Using the Krown 200 AUTO-ANSWER FeatureAnswer ASCII? Y/N Autoanswer OFFTo Activate Remote Message Retrieval and Deletion XXXXXX Hello GA IV Emergency Call Wide Print MULTI-WIDE Printing FeatureNormal Print Jumps Over the LazyAscii Code Using the Optional Ascii Feature and Fast TypeFast Type To Make Your Ascii Call Using the Optional Ascii Feature and Fast TypeTo Change Mode Settings Ascii To Receive AN Ascii CallTo Change the Brightness Select Font Size and Adjust Brightness for Your DisplayTo Change Font Size HCO Viii HOW to USE VCO and HCO CallPM? Y/N IX Using the Clock CalendarAnswering a Cellular Call Using Your Krown 200 with a Wireless PhoneMaking a Cellular Call with Your Krown Troubleshooting for TDD-WIRELESS Call Using Your Krown 200 with Wireless PhoneUsing Your Krown 200 with a Cordless Phone XI Loading and Changing the Paper XII Take Your Krown 200 with YOU Xiii Technical Specifications Taking Care of Your TDD TroubleshootingXIV Important Information Commonly Used TDD Abbreviations Special TTY/TDD Operator Services 800XV Miscellaneous Information XVI FCC Required Information Page Orders
Top Page Image Contents