RFID CONTROL Submenus
RFID CONTROL Submenus
Reader
This menu item allows the user to enable or disable the RFID UHF encoder. The default is Enable.
Tag Type
This menu item allows the user to specify the tag type in use. The default is Class 1. Other classes may be added in the future.
Error Handling
This menu item allows the user to disable the printing of the Overstrike pattern for a failed label. The default is Overstrike.
In Overstrike mode, each failed label prints with the Overstrike pattern and the form retries until the Label Retry count is exhausted. At this time, the error message “RFID Error: Check System” displays. The failed label will not be reprinted.
In Stop mode, when a tag fails to be programmed the printer will halt and display the error message “RFID Error: Check Media.” The label will be discarded and reprinting of the label (if desired) must be initiated from the host. When the error is cleared, the label with the failed tag moves forward until the next label is in position to be printed.
In None mode, no specific action is taken when a tag fails to be programmed.
Label Retry
This menu item allows the user to specify the number of label retries that the RFID UHF encoder will attempt before declaring a fault indicating a problem with the RFID UHF encoder, the assembly antenna, the printer setup, or the label stock. Label Retry only applies when the Error Handling mode is Overstrike. The default is 5.
In the Overstrike mode, each failed label prints with the Overstrike pattern and the form retries until the label retry count is exhausted. At this time, the error message “RFID Error: Check System” displays. The failed label will not be reprinted.
53