Printronix T5000 setup guide Paper Feed Shift, Label Length

Page 43

QUICK SETUP Submenus

after a specified number of labels have been printed using a software cut command. It cuts continuous roll paper, labels, or tag stock.

NOTE: This feature is currently not supported using the RFID UHF encoder.

•Continuous. Printer prints on the media and sends it out the front.

The default is Tear-Off Strip.

Paper Feed Shift

Represents the distance to advance a label (+ shift) or pull back (– shift) when the Tear-Off Strip, Tear-Off, Peel-Off, or Cut Media Handling option is enabled. The allowable range is -0.50 inches to the current Label Length value setting up to a maximum of 12.80 inches in 0.01 inch increments.

The default is 0.00 inches.

Label Length

In most applications, the user-selected Label Length will match the physical label length. Physical label length is the actual label length of the media installed. Following is a list of different media types:

•Die-cut labels – measurable length of the removable label (leading edge to trailing edge). This does not include the liner material or gap.

•Tag Stock with notches or holes – measurable length from the trailing edge of one notch or hole to the trailing edge of the next notch or hole.

•Tag Stock with black marks on the underside – measurable length from the leading edge of one black mark to the leading edge of the next black mark.

•Continuous media (no label length indicators) – measurable length should be within + 1-2% of the Label Length value entered.

43

Image 43

Contents Smart Label Developer’s Quick Setup Guide Page Page Page Smart Label Developer’s Quick Setup Guide Software License Agreement Acknowledgement of Terms and Conditions Communication NoticesTermination of License Agreement Government Restricted RightsGerman Conformity Statement European Community EC Conformity StatementPage Trademark Acknowledgements Table of Contents Smart Label Development Overview Smart Label Developer’s Application Reference NotesWhat To Expect When Running Your Rfid Application What To Expect When Running Your Rfid ApplicationFactors Affecting Smart Label Performance Smart Label Limitations Overstruck Smart LabelsOverstruck Smart Labels How It Works How Printronix Makes It EasyHow It Works How To Order More Smart LabelsPart Number What We Can Do Printronix Professional ServicesPrintronix Professional Services Hardware/Infrastructure ConsiderationsReference Material Alien Technology Advanced Wireless IndentificationsUseful Industry Web Links Reference MaterialUseful Industry Web Links Unpacking The Printer Unpacking And Installing The PrinterRemoving The Internal Packing Material Unpacking And Installing The PrinterInstallation InstallationPower Switch Controls And IndicatorsControl Panel Control PanelOffline Job Online StatusLiquid Crystal Display LCDControl Panel Keys Down Key in Menu mode Menu Key Controls And IndicatorsEnter Key Loading Roll Media Loading Media And RibbonLoading Roll Media Loading Media And Ribbon Loading Roll Media Loading Media And Ribbon Media left edge Platen left edge Loading Ribbon Loading Ribbon Left Pressure Block Printing AdjustmentsPrinthead Pressure Adjustment Printhead Pressure Block AdjustmentsPositioning The Media Sensors Running Auto CalibratePositioning The Media Sensors Saving The Configuration Saving The ConfigurationRun a Barcode Demo Test Power-Up Config Quick Setup MenuQuick Setup Menu Print Intensity Print Speed Print ModeSMT Status SMT Sel Toolset SMT Select Tool Quick Setup SubmenusQuick Setup Submenus Print IntensityPrint Speed Print ModeMedia Handling Label Length Paper Feed ShiftOrientation Label WidthVer Image Shift Hor Image ShiftTopTheimagethe toparallelofedge ofedgeis leftthemedia.the Gap/Mark Sensor Validator Funct Auto CalibrateSMT Sel Toolset Save ConfigPower-Up Config SMT StatusSMT Select Tool For More InformationFor More Information Smart Label Development Rfid Control Menu Rfid Control MenuTag Type Error HandlingRfid Control Submenus ReaderAdmin User Menu Items Format Rfid PGL CommandsWrite Tag Write TagExample Rfid PGL Commands~EXECUTEDYNATAG ~RF1*HELLOTAG Write Tag ExampleEND ~EXECUTEHELLO ~NORMAL ~CREATEDYNATAGRead Tag Barcode Read Tag~EXECUTEREADTAG ~AF1*DATA from 0 to 7 = @1,8 Get Tag Unique ID Rfid PPI1 CommandsSet Tag Type Startblock Format RTWrite Tag command Tools List Software Migration Tools SMTTools List Software Migration Tools SMT Selecting The Tools Selecting The ToolsRfid MAX Retry Error MessagesError Messages Error Message List Explanation SolutionTroubleshooting the Rfid UHF Encoder Symptom Solution TroubleshootingTroubleshooting Index SMT IndexIndex Index Page 177393-001