6.4 RECORD SEARCH AND PLAYBACK
Clicking the Search icon in the lower right of the Main Display Interface will cause it to switch to the Search and Playback Interface. This interface handles both the Record
Search and Playback functions in addition to allowing you to back up your records.
RECORD SEARCH
Searches are based on date and time. Additional criteria can be selected to narrow the search. These criteria include the type of the recording and where the files are saved.
PICTURE 6-9
Pressing the back arrow in the upper right of the display will return you to live surveillance in the Main Display Interface.
STEP 1. Select whether the program should search in the normal destination location (See Section
6.3Recording to Hard Drive) and/or where you’ve backed up recorded files (Covered in Section
6.5Other functions)
STEP 2. Select the nature of the recording - whether it was a scheduled record, recorded as a result of motion detection or etc. You can select more than one category.
STEP 3. Enter the date and time. A calendar will pop up. If there was an event recorded on that date it will be highlighted.
STEP 4. The program will display the search results at the bottom of the screen. They will be color coded to indicate the mode in which they were recorded.
PICTURE 6-10
PICTURE
PICTURE
RECORDING, PLACHPTERYBACK6AND RECORD SEARCH
32 | 33 |