9.6 SYSTEM SETUP
Click 
and enter the main setup interface.
PICTURE 9-49
NOTE! When multiple clients access the system configuration interface simultaneous, the user who enters into that interface first gets priority and then others will not be able to access it.
BASIC CONFIGURATION
Caption
There are four options: None, ID, Name and | PICTURE |
ID/Name to select from. |
|
‘None’ means no title or name. |
|
‘ID’ means camera numbers, i.e. 1,2,3 and so on. |
|
‘Name’ means camera names,i.e. Cam1, Cam2 and so on. |
|
‘ID/Name’ means both camera number and camera name,i.e. 1/Cam1, 2/Cam2 and so on.
Live audio
Your card supports accepts audio input through the RCA ports on the Audio In dongle. You can choose the video channel to associate with these audio signals.
Server PC Setup
You can enter the user name and password for the computer which houses the video capture card in the appropriate boxes. This
way, when the computer system restarts, itPICTURE
and password input in these boxes to begin running the SuperDVR application.
As the Windows system may become unstable after a couple of days of continuous operation. It may cause the SuperDVR system to become unstable. The software supports
ALARM SETUP
The Alarm setup configuration is similar to that in the SuperDVR software.
Buzzer - Users can select whether to sound the computer buzzer if the alarms have been triggered also select how long the buzzer sounds.
Full screen alarm - Users can select whether channel will be full screen when alarm triggered. Set the full screen hold
time here
Disk storage alarm - If the Partition’s free space is less than the assigned percentage, it will stop recording or recycling, but give alarm tips according to the settings
Motion holding time - The continuous recording time after motion stopped Sensor holding time - The continuous recording time after sensor stopped
CHAPTER 9 REMOTE SURVEILLANCE & PLAYBACK
74 | 75 |