Q-See QSDT8PCDP, QSDT8PCRC Quick Start Instructions, Installation Instructions, Troubleshooting

Page 52

QUICK START INSTRUCTIONS

INSTALLATION INSTRUCTIONS

STEP 1. Insert the PCI card (But do not connect the Camera yet). STEP 2. Launch Windows.

Windows will come up with Hardware wizard. Just click ‘Cancel’.

STEP 3. Put the installation CD in the drive and open up SuperDVR folder and run the ‘Setup’ file.

Step 4. Follow the steps and in WinXP, it will come up with a message saying the program has not passed Windows logo testing, just select ‘Continue anyway’.

STEP 5. Reboot computer once installation has completed. Once Booted up, On Desktop there will be a ‘SuperDVR’ icon.

If this program recognizes the PCI card, program will open OK. Please log in to the program. Once your program is opened, now connect the Cameras.

TROUBLESHOOTING

When opening the SuperDVR program, it says ‘ Can’t find card ’.

Reboot one more time. If you still have the same problem, click ‘Start - Program - SuperDVR - Install’ and then uninstall the program. Reboot the computer. After reboot, go back to ‘Start - Program - SuperDVR - Install’. Now click on ‘Install’ to reinstall driver. Then Reboot.

If for some reason still ‘Can’t find card ’, uninstall driver again. Shut down the computer. Move PCI Card to another slot. Reboot it. And click ‘Cancel’ when Windows detects it.

Then reinstall driver by going to ‘Start - Program - SuperDVR - Install’.

How to setup the web client to monitor from Internet

On Main Computer where DVR Card Installed

STEP 1. Make sure the computer is connected to Internet. DSL or Cable Modem, or T1/ T3 line.

STEP 2. Find out your router’s public IP address. You can go to www.myipaddress from the computer the card is installed in.

STEP 3. Open up the SuperDVR program and go to basic configuration. Checkmark ENABLE Web Camera Service and Remote Play Back Service.

STEP 4. Make Note of Data Port, Command Port and RPB port.

NOTE! If you are connecting to internet using a router, you need to configure the setup of the router and do the port forwarding. Ports that need to be forwarded: 80, 1159 and 1160. Check your router manual on how to set that up.

On the Remote Client Computer

STEP 1. Minimum Requirement for the client computer:

-2.8 GHZ processor or later -512 MB RAM

-Windows 2000 (SP4 minimum), Win XP (SP2 minimum), Vista, Windows 7

-MOST AGP and PCI-E cards with 128MB of Video RAM and full Direct Draw support are supported.

-DirectX 9.0 minimum

-500 GB free space on HDD

STEP 2. Open up Internet Explorer.

If you are running XP with SP2 on Internet explorer, click ‘Tools - Internet Option - Security - Custom Level’, and enable ‘Download unsigned ActiveX controls’.

STEP 3. In the IE textbox of the Internet explorer, input the router’s Public IP. STEP 4. Select ‘Live Surveillance’ and click ‘OK’ on displayed page.

This will download the Webcam program. And then you can download Remote Playback as well.

STEP 5. On Desktop now you should see ‘Webcam’ and ‘Remote Playback’ icon. STEP 6. Open up Webcam, click ‘Key’ symbol icon.

Username: system (Password blank unless you setup a password on the main computer).

Server: this the IP address of the Main Computer.

Data port: 1159 and Command port: 1160.

STEP 7. Click ‘OK’. Now you should be able to view the live video from main computer.

STEP 8. To play back the Video that has been recorded in Main Computer, Select ‘Remote Playback’ on displayed page.

STEP 9. Click on ‘Config’.

Remote server: the IP address of main computer.

IP port: 1161.

STEP 10. Then click ‘OK’.

STEP 11. Click ‘Login’. Now you should be able to play back the recorded video from Main Computer.

APPENDIX

102

103

Image 52
Contents Model QSDT8PCRC Model QSDT8PCDP Model QSDT16PCRC About this Manual Table of Contents Configuring Router for Remote Access Ddns Dynamic Domain Name ServiceAccessing the DVR Using Internet Explorer System SetupFeatures and Specifications IntroductionSystem Requirements and Chapter Specifications System SpecificationsSystem Requirements QSDT8PCRP & QSDT8PCDPConnecting Multiple Cards Video Capture CardQSDT8PCDP Card AudioQSDT8PCRP Card Video and Audio PIN LayoutQSDT16PCRP Card VIDEO2 VIDEO3 VIDEO4 VIDEO5Connecting a PTZ Camera PTZ Camera RS485 to Serial AdapterInstalling the Software Installing the SuperdvrSoftware User Account Control for Windows Vista and Windows Display Control Panel Basic OperationOther Controls Basic Configuration Recording ConfigurationRECORDING, Playback and Chapter Record Search Recording Modes Recording to Hard Drive Record Search and Playback Record SearchOther Functions File BackupPlayback Deleting Recorded Files Capture PicturesSystem Settings Digital Image ZoomBasic Configuration Camera Display SettingsSystem LOG in and Reboot Video ConfigurationAlarm Configuration Alarm TypesAlarm Record Triggered ActionsMail Setup Interface MAP ConfigurationAuto Mail Using the E-MAP User ConfigurationUser Rights P.T.Z Control Configuration Protocol SetupZ. Cameras ADD UserSerial Ports Setup Preset and Group SelectPreset PTZ OperationConfiguring Router for Remote Access Remote SurveillancePlayback Remote Live SurveillanceGo to Part 2 Determine the Number of Routers on the NetworkIf Multiple Routers are Detected Part 3 Simple Port Forwarding PartList Test that the ports now work Part 4 Setting UP DMZ in Router Ddns Dynamic Domain Name Service Accessing the DVR Using Internet ExplorerSetting UP Ddns User Account Control for Windows Vista and WindowsSetting Up ActiveX Control Click on the Security TabClick OK Domain Name Service into the addressObtained in .3 Ddns Dynamic Accessing the Internet Explorer Client IconRemote Playback Remote BackupRecord Playback and Control Surveillance & Playback System Setup Alarm SetupServer PC Setup Live audioCamera Setup Alarm ConfigurationRecord Configuration Schedule ConfigurationMail Configuration Motion ConfigurationStorage Disk P.T.Z Configuration Serial Port SetupMobile Surveillance Windows Mobile PROSymbian Mobile SurveillanceInstalling Through the Iphone or Ipad Iphone and IpadInstalling Through PC or Macintosh Computer Main Menu Operating Instructions for IPHONE/IPADLive View Interface Configuration Interface Image View InterfaceRecord Playback Interface Server List InterfaceSoftware Installation LoginAndroid Operating SupercamImage View Live ViewRecord Playback Frequently Asked Questions AppendixFrame rate Resolution Picture quality Used Space MB Hour 100 101 Installation Instructions TroubleshootingOn Main Computer where DVR Card Installed Quick Start InstructionsFunction Tree System Configuration Tree ConfigIE Client Function Tree Remote Playback Function Tree Liability Exclusions See Product WarrantySee Products 110 111
Related manuals
Manual 104 pages 32.84 Kb Manual 104 pages 32.87 Kb